formatting corrections

0-Cover/Cover.tex

@@ -3,7 +3,7 @@
 		\vspace*{1cm}
 		\begin{Huge}
 		\textbf{Measuring Bulk Material Flow using Commercially-Available LIDAR Sensors}\par
-		\textbf{---First Draft---}\par
+		\textbf{---Final Draft---}\par
 		\end{Huge}
 		\vfill
 		\large
@@ -20,8 +20,8 @@
 		\vfill
 		\normalsize
 		\begin{align*}
-		&\text{1. Examiner: Prof. Dr.-Ing M. Protogerakis}\\
+		&\text{1. Examiner: Prof. Dr.-Ing. M. Protogerakis}\\
-		&\text{2. Examiner: Prof. Dr.-Ing R. Beck}
+		&\text{2. Examiner: Prof. Dr.-Ing. R. Beck}
 		\end{align*}
 		\vfill
 		Düsseldorf\\

1-Introduction/Introduction.tex

@@ -41,7 +41,7 @@ The central \textbf{research question} that is investigated in this work is:
 
 As given by the research question above, one of the central parameters is the question of cost. Since the cost of industrial equipment can be many multiples of the cost of commercially available products, studying alternatives becomes attractive.
  
-As an example, the cost price of the Intel RealSense L515 used in this project was €380\footnote{Due to Intel announcing that they are discontinuing their LIDAR sensor series, the price of this particular product has risen up to €570 as of January 2022.}, whereas the SICK LM400 used by Fojtik\cite{fojtik2014} can cost upwards of €4000\footnote{This price is an aggregate estimate based on multiple online merchants as of January 2022}.
+As an example, the cost price of the Intel RealSense L515 used in this project was \euro{380}\footnote{Due to Intel announcing that they are discontinuing their LIDAR sensor series, the price of this particular product has risen up to \euro{570} as of January 2022.}, whereas the SICK LM400 used by Fojtik\cite{fojtik2014} can cost upwards of \euro{4000}\footnote{This price is an aggregate estimate based on multiple online merchants as of January 2022}.
 
 \subsection{Use of the LIDAR Sensor}
 

3-Design/Design.tex

@@ -256,15 +256,15 @@ Network & 2x Ethernet 100 BASE-TX \\ \hline
 \caption{The relevant technical specifications of the Hilscher netHat\cite{nethatHilscher}.}
 \end{table}
 
-\subsection{Cost Breakdown}
+\textbf{Cost Breakdown}\nopagebreak
 \begin{table}[H]
 \centering
 \begin{tabular}{| c | c |}
 \hline
-Intel RealSense L515 & €380\tablefootnote{The cost has since increased to €570 as of January 2022.}\\ \hline
+Intel RealSense L515 & \euro{380}\tablefootnote{The cost has since increased to \euro{570} as of January 2022.}\\ \hline
-Raspberry Pi Model 4 B & €84 \\ \hline
+Raspberry Pi Model 4 B & \euro{84} \\ \hline
-netHAT & €69 \\ \hline
+netHAT & \euro{69} \\ \hline
-\textbf{Total} & \textbf{€553\tablefootnote{Due to a malfunctioning unit, a new sensor was purchased, bringing the total cost of development to around €1120.}} \\ \hline
+\textbf{Total} & \textbf{\euro{553}\tablefootnote{Due to a malfunctioning unit, a new sensor was purchased, bringing the total cost of development to around \euro{1120}.}} \\ \hline
 \end{tabular}
 \caption{Breakdown of the costs used in the development of this project.}
 \label{table:cost}

5-Conclusion/Conclusion.tex

@@ -17,7 +17,7 @@ The netHAT was also shown to be performant and stable during testing. Combined w
 
 \item[Software Suitability] \hfill \\ The software architecture as laid-out in \autoref{chap:design} was shown to fulfill the requirements of the process. The individual software elements and libraries such as ZeroMQ and Qt were shown to be robust enough to carry out the configuration process. The software was shown to successfully combine the separate process elements into a single workflow which simplified the configuration process.
 
-\item[Cost Suitability] \hfill \\ At a development cost of just under €600---even at a profit margin of \SI{500}{\percent}---the system is still able to remain competitive with conventional systems in use in the industry today\footnote{See \autoref{table:cost}}.
+\item[Cost Suitability] \hfill \\ At a development cost of just under \euro{600}---even at a profit margin of \SI{500}{\percent}---the system is still able to remain competitive with conventional systems in use in the industry today\footnote{See \autoref{table:cost}}.
 
 \item[Housing Suitability] \hfill \\ The housing designed for the field-testing stage of this project is only suitable as a prototype. A more robust housing must be developed out of more durable materials, and account for weather and vibration.
 \end{description}

II-Thanks/Thanks.tex

@@ -1,6 +1,6 @@
 \chapter{Acknowledgments}\label{chap:ack}
 
-I would like to give special thanks to Prof. Dr.-Ing. Michael Protogerakis for his attentive supervision of my Master Project and this thesis.
+I would like to give special thanks to Prof. Dr.-Ing. Michael Protogerakis for his attentive supervision of my Master's Project and this thesis.
 
 N. Stuhrmann and M. Meilchen too have my gratitude for their tireless assistance in the laboratory.
 

III-Eides/Eides.tex

@@ -8,8 +8,8 @@ Düsseldorf, February 2022
 Nareshkumar Rao
 
 This thesis was supervised by:\\
-1. Examiner: Prof. Dr.-Ing M. Protogerakis\\
+1. Examiner: Prof. Dr.-Ing. M. Protogerakis\\
-2. Examiner: Prof. Dr.-Ing R. Beck
+2. Examiner: Prof. Dr.-Ing. R. Beck
 
 \vspace{2em}
 \hrule
@@ -24,5 +24,5 @@ Düsseldorf, Februar 2022
 Nareshkumar Rao
 
 Diese Arbeit wurde betreut von:\\
-1. Prüfer: Prof. Dr.-Ing M. Protogerakis\\
+1. Prüfer: Prof. Dr.-Ing. M. Protogerakis\\
-2. Prüfer: Prof. Dr.-Ing R. Beck
+2. Prüfer: Prof. Dr.-Ing. R. Beck

Main.tex

@@ -61,6 +61,7 @@
 \newcommand{\todoi}[1]{\todo[inline]{#1}}
 \newcommand{\cpp}{\texttt{C++}}
 \newcommand{\clang}{\texttt{C}}
+\newcommand{\euro}[1]{€\,#1}
 \newcommand{\fullWidthImage}[3]{
 \begin{figure}[h]
 	\includegraphics[width=0.9\textwidth]{#1}